bimobil husky 270back to overview
bimobil husky 270Ford Ranger Single Cab
Layout 4see more
Layout 3see more
InteriorThe cabin 270 is offered with layout 4 however layout 3 is also possible.
All models are equipped with hanging lockers, seat storage boxes, linen cupboard and wardrobe. All things of daily use also find their place. Dishes, pots, pans and supplies can be stored clearly arranged in the kitchen block. Cutlery disappears in the cutlery drawer.
The sanitary rooms are bright and functionally furnished and equipped with many storage possibilities. The waterproof glued, colour-coated built-in elements are stable and withstand even long use. The colours, whether discreet or bright, can be chosen individually. High-quality chrome-plated fittings and, of course, the matching bar system with towel holders give the shower-washroom the finishing touch.
The seating group is at the rear of the vehicle and sits two people comfortably. An extension can be mounted on the right-hand bench to increase the seating area if required. The table can be lowered to convert the seating group to an additional bed. The seats are mounted on a raised platform, under which there is lots of storage space across the whole width of the cabin, accessible from the outside on both sides and through the right hand bench. The other bench contains the technical equipment.
A floor-to-ceiling wardrobe is fitted next to the left hand seat, with a shelf and hanging space. The floor of the wardrobe is used to house the power supply. The large washroom with shower tray, enamelled basin, large mirror, shelves, rooflight and swivel WC fits in between the wardrobe and the Luton bed. The external gas locker is hidden in the washroom cupboard.
The good-sized kitchen with two-burner hob and separate stainless steel sink is on your right as you enter the cabin, opposite the bathroom. It has a cutlery drawer and two spacious cupboards, large 95l refrigerator and, of course, a spice rack. The fresh water tank is hidden in the floor of the kitchen.
The Luton bed is accessible via a fold out step, and ensures an excellent night’s sleep with its comfortable Froli spring system, foam mattress and under-bed ventilation/heating.
A recessed step at the entrance and an electric step makes access to the cabin easy. Overhead lockers all round and on one side of the Luton provide plenty of storage capacity. The waste water tank and dump value is fully insulated and fitted into an aluminium tray at the rear of the vehicle.
On your left as you enter the husky cabin, set against the rear wall, is the galley fitted with a Formica worktop (Corian worksurface with Luminum panel optional upgrade), stainless steel hob/sink combination with smoked glass lid, fold-away chrome mixer tap, 60 l refrigerator, cutlery drawer and extra storage space. Adjacent, in the other rear corner, is the 100 x 67 cm (3’3” x 2’2”) corner bathroom with fitted shower tray, fold-away corner basin, swivel cassette WC, large mirror, shelf and a skylight in the roof.
A 120 cm high wardrobe with an additional shelf is located next to the bathroom.
The lower portion of the wardrobe holds the electrical equipment. The large seating group is situated in the front of the lower part of the cabin, directly adjacent to the Luton. The seating group is on a 23 cm hollow pedestal, which can be accessed for storage. One of the benches is used to hold technical cabin equipment, the other is open so the storage area here is 58 cm high. The storage can also be accessed from the outside of the cabin, some of the storage is full cabin width. The seating group table can be lowered quickly, and the seating group converted to a comfortable double bed. The huge Luton bed above is spacious (around 80 – 90 cm high depending on the base vehicle model) and its base is insulated and heated.
Overhead lockers are fitted above both seats and the kitchen. The waste water tank and dump valve are fitted into an insulated and heated aluminium tray below the rear of the vehicle, so the valve is kept clean and will not freeze.