bimobil husky 220back to overview
Catalogue or datasheet
Layout 2Lsee more
Layout 3see more
The rear seating group has two opposite benches. On request the narrower seat can be enlarged to the level of the wider bench by means of a foldable widening. By simply lowering the table top a lying surface is created. The seating group stands on a platform with a height of 25 cm. Underneath is a storage space over the full width of the cabin which is 60 cm high in the area of the seat compartments. The technology occupies the seat stowage box on the driver’s side, the seat stowage box on the passenger’s side is fully available as storage space and is accessible from both inside and outside via the storage space exterior flap.
Between the rear seating area and the kitchen there is a room divider with integrated spice rack. The kitchen unit is equipped with a resopal or, in the case of the aluminium unit, with a mineral-coated worktop, stainless steel cooking sink combination with glass cover, hinged chrome plated water tap, 60-litre refrigerator, cutlery drawer and two large storage compartments.
A wardrobe with 115 cm hanging space and one shelf is situated next to the galley.
Overhead bay sleeping area
A small step in front of the wardrobe allows easy access to the large alcove double bed, which is comfortably equipped with Froli slatted bedding and ventilation (if required with warm air).
The shower is located next to the entrance. It has a footprint of 109 x 67 cm and is equipped with a shower tray, enamelled washbasin, a large mirror, storage shelf, a rotating cassette toilet and a roof hood. Underneath the washbasin is the gas cylinder compartment, which can only be accessed from the outside.
- 1 Rear dinette
- 2 Kitchen
- 3 Wardrobe
- 4 Overhead bay sleeping area
- 5 Bathroom